ASTM-D5467 1997
$40.63
D5467/D5467M-97e1 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
| Published By | Publication Date | Number of Pages |
| ASTM | 1997 | 6 |
1.1 This test method covers the in-plane compressive properties of polymer matrix composite materials reinforced by high-modulus fibers in a sandwich beam configuration. The composite material forms are limited to continuous-fiber composites of unidirectional orientation. This test procedure introduces compressive load into a thin skin bonded to a thick honeycomb core with the compressive load transmitted into the sample by subjecting the beam to four-point bending.
1.2 This procedure is applicable primarily to laminates made from prepreg or similar product forms. Other product forms may require deviations from the test method.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text the inch-pounds units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
Note 1Additional procedures for determining compressive properties of polymer matrix composites may be found in Test Methods D 3410/D 3410M and D 695.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Related products
-
ASTM-D5466 1995
D5466-95 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)…
-
ASTM-D5267 1997
D5267-97 Standard Test Method for Determination of Extrudability of Cartridge Adhesives Published By Publication Date…
-
ASTM-D5476 1999
D5476-99 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005) Published By Publication Date…
-
ASTM-D1467:1995 Edition
D1467-89(1995)e1 Standard Guide for Testing Fatty Acids Used in Protective Coatings (Withdrawn 2003) Published By…
-
ASTM-D4467 1994
D4467-94 Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed…
-
ASTM-D5867 1995
D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume…
-
ASTM-D5067 1999
D5067-99 Standard Specification for Artists’ Watercolor Paints Published By Publication Date Number of Pages ASTM…
-
ASTM-D546 1999
D546-99e1 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures Published…
-
ASTM-D5567 1999
D5567-94(1999) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems Published By…
-
ASTM-D5437 1993
D5437-93 Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999) Published By Publication…
-
ASTM-D5367 1994
D5367-94 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent…
-
ASTM-D5477 1995
D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy…
-
ASTM-D5447 1993
D5447-93e1 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem (Withdrawn…
-
ASTM-D5647 1995
D5647-95 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus Published By Publication…
-
ASTM-D6467 1999
D6467-99 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength…
-
ASTM-D2467 1999
D2467-99 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Published By Publication…
-
ASTM-D5468 1995
D5468-95 Standard Test Method for Gross Calorific and Ash Value of Waste Materials Published By…
