ASTM-E207 2008
$40.63
E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
| Published By | Publication Date | Number of Pages |
| ASTM | 2008 | 7 |
1.1 This test method covers a test for determining the thermoelectric emf of a thermoelement versus NIST platinum 67 (Pt-67) by means of measuring the difference between the emf of the test thermoelement and the emf of a reference thermoelement (previously referred to as a secondary standard), which has a known relationship to NIST Pt-67.
1.2 This test is applicable to new thermocouple materials over the temperature ranges normally associated with thermocouples and their extension wires. The table on Suggested Upper Temperature Limits for Protected Thermocouples in Specification E 230 lists the ranges associated with the letter-designated types of thermocouples. ASTM MNL-12 lists the temperature range of extension circuit materials.
1.3 This test is not applicable to stability testing or inhomogeneity testing.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method |
| 2 | Significance and Use Test Specimen Reference Thermoelement |
| 3 | Reference Temperature Unit Measuring Junction Test Temperature Medium |
| 4 | Emf Indicator Procedure |
| 5 | Calculation and Report FIG. 1 |
| 6 | Precision and Bias Keywords X1. USING A DATA ACQUISITION SYSTEM AS AN EMF RECORDING DEVICE X1.1 X1.2 X1.3 TABLE 1 |
| 7 | X1.4 |
Related products
-
ASTM-E407 2007
E407-07 Standard Practice for Microetching Metals and Alloys Published By Publication Date Number of Pages…
-
ASTM-E2207 2008
E2207-08 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens Published By Publication…
-
ASTM-E200 2008
E200-08 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical…
-
ASTM-E2027 2009
E2027-09 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and…
-
ASTM-E202 2005
E202-05 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols Published By Publication…
-
ASTM-E257 2003
E257-98(2003)e1 Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn…
-
ASTM-E507 2009(Redline)
E507-09 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption…
-
ASTM-E307 2008
E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures Published By Publication Date…
-
ASTM-E2207 2008(Redline)
E2207-08 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens (Redline) Published By…
-
ASTM-E267 2001
E267-90(2001) Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances (Withdrawn 2006) Published…
-
ASTM-E2070 2018
E2070-13(2018) Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods Published…
-
ASTM-E2707 2009
E2707-09 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct…
-
ASTM-E208 2000
E208-95a(2000) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic…
-
ASTM-E2607 2008
E2607-08 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements Published By…
-
ASTM-E209 2000
E209-00 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or…
-
ASTM-E2070 2008(Redline)
E2070-08 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods (Redline)…
-
ASTM-E2067 2000
E2067-00a Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests Published By Publication Date Number…
-
ASTM-E2073 2002
E2073-02 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings Published By Publication Date…
-
ASTM-E207 2000
E207-00 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with…
-
ASTM-E2087 2000
E2087-00 Standard Specification for Quality Indicators for Controlled Health Vocabularies (Withdrawn 2009) Published By Publication…
-
ASTM-E287 2002
E287-02 Standard Specification for Laboratory Glass Graduated Burets Published By Publication Date Number of Pages…
-
ASTM-E2067 2008
E2067-08 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests Published By Publication Date Number…
-
ASTM-E200 2008(Redline)
E200-08 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical…
-
ASTM-E2007 2008
E2007-08 Standard Guide for Computed Radiography Published By Publication Date Number of Pages ASTM 2008…
-
ASTM-E507 2008
E507-08 Standard Test Method for Analysis of Aluminum in Iron Ores by Flame Atomic Absorption…
-
ASTM-E203 2001
E203-01 Standard Test Method for Water Using Volumetric Karl Fischer Titration Published By Publication Date…
-
ASTM-E203 2008
E203-08 Standard Test Method for Water Using Volumetric Karl Fischer Titration Published By Publication Date…
-
ASTM-E207 2008(Redline)
E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with…
-
ASTM-E507 2003
E507-03 Standard Test Method for Aluminum in Iron Ores by Atomic Absorption Spectrometry Published By…
-
ASTM-E607 2002
E607-02 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to…
-
ASTM-E2207 2002
E2207-02 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens Published By Publication…
-
ASTM-E208 2006
E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic…
-
ASTM-E247 2005
E247-01(2005) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related…
-
ASTM-E203 2008(Redline)
E203-08 Standard Test Method for Water Using Volumetric Karl Fischer Titration (Redline) Published By Publication…
-
ASTM-E205 2005
E205-96(2005) Standard Specification for Glass and Oxygen Combustion Flask Published By Publication Date Number of…
-
ASTM-E209 2018
E209-18 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or…
-
ASTM-E2070 2008
E2070-08 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods Published…
-
ASTM-C207 2018(Redline)
C207-18 Standard Specification for Hydrated Lime for Masonry Purposes (Redline) Published By Publication Date Number…
-
ASTM-E707 2002
E707-90(2002) Standard Test Method for Skid Resistance Measurements Using the North Carolina State University Variable-Speed…
-
ASTM-E2407 2004
E2407-04 Standard Test Method for Effectiveness of Defoaming Agents Published By Publication Date Number of…
