Name: ICC IECC 2018 PDF - PDF Standards Store
Price: 32.09 USD
Availability: InStock

The IECC addresses energy efficiency on several fronts including cost savings, reduced energy usage, conservation of natural resources and the impact of energy usage on the environment.

Key changes include:

Log homes designed in accordance with the standard ICC 400, Standards on the Design and Construction of Log Structures, are exempt from the building thermal envelope requirements of the IECC.
The maximum allowable fenestration U-factors in Table R402.1.2 (for the prescriptive compliance path) for climates zones 3 through 8 have been reduced from the values in the 2015 edition.
The ICC/RESNET 380 standard has been included as one of standards that can be used for determining the air leakage rate of a building or dwelling unit.
The Energy Rating Index compliance alternative index values have been increased slightly however, the method for determining an index is now required to be in accordance with standard ICC/RESNET 301.
Revisions to interior and exterior lighting power budgets and better clarity for lighting controls.
Clarity that regardless of design methodology, system commissioning is required.
New limits on heated or cooled vestibules.
Mechanical provisions reorganized based on equipment type rather than design methodology.

PDF Catalog

PDF Pages	PDF Title
1	2018 IECC® INTERNATIONAL ENERGY CONSERVATION CODE®
2	2018 IECC® TITLE PAGE
3	COPYRIGHT
4	PREFACE
8	EFFECTIVE USE OF THE INTERNATIONAL ENERGY CONSERVATION CODE
12	TABLE OF CONTENTS
14	IECC—COMMERCIAL PROVISIONS TABLE OF CONTENTS
16	CHAPTER 1 [CE] SCOPE AND ADMINISTRATION PART 1—SCOPE AND APPLICATION SECTION C101 SCOPE AND GENERAL REQUIREMENTS SECTION C102 ALTERNATIVE MATERIALS, DESIGN AND METHODS OF CONSTRUCTION AND EQUIPMENT PART 2—ADMINISTRATION AND ENFORCEMENT SECTION C103 CONSTRUCTION DOCUMENTS
18	SECTION C104 FEES SECTION C105 INSPECTIONS SECTION C106 VALIDITY
19	SECTION C107 REFERENCED STANDARDS SECTION C108 STOP WORK ORDER SECTION C109 BOARD OF APPEALS
20	CHAPTER 2 [CE] DEFINITIONS SECTION C201 GENERAL SECTION C202 GENERAL DEFINITIONS
26	CHAPTER 3 [CE] GENERAL REQUIREMENTS SECTION C301 CLIMATE ZONES
27	FIGURE C301.1 CLIMATE ZONES
28	TABLE C301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
29	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
30	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
31	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
32	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
33	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
34	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
35	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
36	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
37	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
38	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
39	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
40	TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE C301.3(1) INTERNATIONAL CLIMATE ZONE DEFINITIONS
41	TABLE C301.3(2) INTERNATIONAL CLIMATE ZONE DEFINITIONS SECTION C302 DESIGN CONDITIONS SECTION C303 MATERIALS, SYSTEMS AND EQUIPMENT
42	TABLE C303.1.3(1) DEFAULT GLAZED WINDOW, GLASS DOOR AND SKYLIGHT U-FACTORS TABLE C303.1.3(2) DEFAULT OPAQUE DOOR U-FACTORS TABLE C303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT
44	CHAPTER 4 [CE] COMMERCIAL ENERGY EFFICIENCY SECTION C401 GENERAL SECTION C402 BUILDING ENVELOPE REQUIREMENTS
45	EQUATION 4-1 TABLE C402.1.4.1 EFFECTIVE R-VALUES FOR STEEL STUD WALL ASSEMBLIES EQUATION 4-2
46	TABLE C402.1.3 OPAQUE THERMAL ENVELOPE INSULATION COMPONENT MINIMUM REQUIREMENTS, R-VALUE METHODa, i
47	TABLE C402.1.4 OPAQUE THERMAL ENVELOPE ASSEMBLY MAXIMUM REQUIREMENTS, U-FACTOR METHODa, b
49	EQUATION 4-3
50	TABLE C402.3 MINIMUM ROOF REFLECTANCE AND EMITTANCE OPTIONSa TABLE C402.4 BUILDING ENVELOPE FENESTRATION MAXIMUM U-FACTOR AND SHGC REQUIREMENTS EQUATION 4-4
51	EQUATION 4-5
53	TABLE C402.5.2 MAXIMUM AIR LEAKAGE RATE FOR FENESTRATION ASSEMBLIES
54	SECTION C403 BUILDING MECHANICAL SYSTEMS
55	EQUATION 4-6 EQUATION 4-7 TABLE C403.3.3 MAXIMUM HOT GAS BYPASS CAPACITY TABLE C403.3.4 BOILER TURNDOWN
56	TABLE C403.3.2(1) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS
57	TABLE C403.3.2(1)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS
58	TABLE C403.3.2(2) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS
59	TABLE C403.3.2(2)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS
60	TABLE C403.3.2(3) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS
61	TABLE C403.3.2(3)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS TABLE C403.3.2(4) WARM-AIR FURNACES AND COMBINATION WARM-AIR FURNACES/AIR-CONDITIONING UNITS, WARM-AIR DUCT FURNACES AND UNIT HEATERS, MINIMUM EFFICIENCY REQUIREMENTS
62	TABLE C403.3.2(5) MINIMUM EFFICIENCY REQUIREMENTS: GAS- AND OIL-FIRED BOILERS TABLE C403.3.2(6) MINIMUM EFFICIENCY REQUIREMENTS: CONDENSING UNITS, ELECTRICALLY OPERATED
63	TABLE C403.3.2(7) WATER CHILLING PACKAGES – EFFICIENCY REQUIREMENTSa, b, d
64	TABLE C403.3.2(8) MINIMUM EFFICIENCY REQUIREMENTS: HEAT REJECTION EQUIPMENT
65	TABLE C403.3.2(9) MINIMUM EFFICIENCY AIR CONDITIONERS AND CONDENSING UNITS SERVING COMPUTER ROOMS TABLE C403.3.2(10) HEAT TRANSFER EQUIPMENT
67	TABLE C403.4.4 VARIABLE SPEED DRIVE (VSD) REQUIREMENTS FOR DEMAND-CONTROLLED PUMPS
68	TABLE C403.5(1) MINIMUM CHILLED-WATER SYSTEM COOLING CAPACITY FOR DETERMINING ECONOMIZER COOLING REQUIREMENTS TABLE C403.5(2) EQUIPMENT EFFICIENCY PERFORMANCE EXCEPTION FOR ECONOMIZERS TABLE C403.5.1 DX COOLING STAGE REQUIREMENTS FOR MODULATING AIRFLOW UNITS
69	TABLE C403.5.3.3 HIGH-LIMIT SHUTOFF CONTROL SETTING FOR AIR ECONOMIZERSb
72	TABLE C403.7.4(1) ENERGY RECOVERY REQUIREMENT (Ventilation systems operating less than 8,000 hours per year) TABLE C403.7.4(2) ENERGY RECOVERY REQUIREMENT (Ventilation systems operating not less than 8,000 hours per year)
73	TABLE C403.7.5 MAXIMUM NET EXHAUST FLOW RATE, CFM PER LINEAR FOOT OF HOOD LENGTH
74	TABLE C403.8.1(1) FAN POWER LIMITATION
75	TABLE C403.8.1(2) FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT
76	TABLE C403.8.5.1 COOLING SYSTEMS
78	TABLE C403.10.1(1) MINIMUM EFFICIENCY REQUIREMENTS: COMMERCIAL REFRIGERATION TABLE C403.10.1(2) MINIMUM EFFICIENCY REQUIREMENTS: COMMERCIAL REFRIGERATORS AND FREEZERS
79	TABLE C403.10.1(2)—continued MINIMUM EFFICIENCY REQUIREMENTS: COMMERCIAL REFRIGERATORS AND FREEZERS
80	TABLE C403.10.2.1(1) WALK-IN COOLER AND FREEZER DISPLAY DOOR EFFICIENCY REQUIREMENTSa TABLE C403.10.2.1(2) WALK-IN COOLER AND FREEZER NONDISPLAY DOOR EFFICIENCY REQUIREMENTSa TABLE C403.10.2.1(3) WALK-IN COOLER AND FREEZER REFRIGERATION SYSTEM EFFICIENCY REQUIREMENTS
82	EQUATION 4-8 TABLE C403.11.3 MINIMUM PIPE INSULATION THICKNESS (in inches)a, c
83	SECTION C404 SERVICE WATER HEATING (MANDATORY)
84	TABLE C404.2 MINIMUM PERFORMANCE OF WATER-HEATING EQUIPMENT
85	TABLE C404.2—continued MINIMUM PERFORMANCE OF WATER-HEATING EQUIPMENT
86	TABLE C404.5.1 PIPING VOLUME AND MAXIMUM PIPING LENGTHS
87	SECTION C405 ELECTRICAL POWER AND LIGHTING SYSTEMS
88	EQUATION 4-9
90	FIGURE C405.2.3.2 SIDELIT ZONE FIGURE C405.2.3.3(1) TOPLIT ZONE
91	FIGURE C405.2.3.3(2) DAYLIGHT ZONE UNDER A ROOFTOP MONITOR FIGURE C405.2.3.3(3) DAYLIGHT ZONE UNDER A SLOPED ROOFTOP MONITOR
92	EQUATION 4-10
93	TABLE C405.3.2(1) INTERIOR LIGHTING POWER ALLOWANCES: BUILDING AREA METHOD TABLE C405.3.2(2) INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD
94	TABLE C405.3.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD TABLE C405.3.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD
95	TABLE C405.3.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD EQUATION 4-11
96	TABLE C405.4.2(1) EXTERIOR LIGHTING ZONES
97	TABLE C405.4.2(2) LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS TABLE C405.4.2(3) INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS
98	TABLE C405.6 MINIMUM NOMINAL EFFICIENCY LEVELS FOR 10 CFR 431 LOW-VOLTAGE DRY-TYPE DISTRIBUTION TRANSFORMERS SECTION C406 ADDITIONAL EFFICIENCY PACKAGE OPTIONS
99	TABLE C405.7(1) MINIMUM NOMINAL FULL-LOAD EFFICIENCY FOR NEMA DESIGN A, NEMA DESIGN B ,AND IEC DESIGN N MOTORS (EXCLUDING FIRE PUMP) ELECTRIC MOTORS AT 60 HZa, b
100	TABLE C405.7(2) MINIMUM NOMINAL FULL-LOAD EFFICIENCY FOR NEMA DESIGN C AND IEC DESIGN H MOTORS AT 60 HZa, b TABLE C405.7(3) MINIMUM AVERAGE FULL-LOAD EFFICIENCY POLYPHASE SMALL ELECTRIC MOTORSa
101	TABLE C405.7(4) MINIMUM AVERAGE FULL-LOAD EFFICIENCY FOR CAPACITOR-START CAPACITOR-RUN AND CAPACITOR-START INDUCTION-RUN SMALL ELECTRIC MOTORSa
102	SECTION C407 TOTAL BUILDING PERFORMANCE
104	TABLE C407.5.1(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
105	TABLE C407.5.1(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
106	TABLE C407.5.1(2) HVAC SYSTEMS MAP
107	TABLE C407.5.1(3) SPECIFICATIONS FOR THE STANDARD REFERENCE DESIGN HVAC SYSTEM DESCRIPTIONS
108	TABLE C407.5.1(4) NUMBER OF CHILLERS TABLE C407.5.1(5) WATER CHILLER TYPES SECTION C408 MAINTENANCE INFORMATION AND SYSTEM COMMISSIONING
112	FIGURE C408.2.4 COMMISSIONING COMPLIANCE CHECKLIST
114	CHAPTER 5 [CE] EXISTING BUILDINGS SECTION C501 GENERAL SECTION C502 ADDITIONS
115	SECTION C503 ALTERATIONS
116	SECTION C504 REPAIRS SECTION C505 CHANGE OF OCCUPANCY OR USE
118	CHAPTER 6 [CE] REFERENCED STANDARDS AAMA AHAM AHRI
119	AMCA ANSI APSP ASHRAE
120	ASME ASTM
121	CRRC CSA CTI DASMA DOE
122	ICC IEEE IES ISO
123	NEMA NFPA NFRC SMACNA UL US-FTC
124	WDMA
126	APPENDIX CA SOLAR-READY ZONE—COMMERCIAL SECTION CA101 SCOPE SECTION CA102 GENERAL DEFINITION SECTION CA103 SOLAR-READY ZONE
128	INDEX
138	IECC—RESIDENTIAL PROVISIONS TABLE OF CONTENTS
140	CHAPTER 1 [RE] SCOPE AND ADMINISTRATION PART 1—SCOPE AND APPLICATION SECTION R101 SCOPE AND GENERAL REQUIREMENTS SECTION R102 ALTERNATIVE MATERIALS, DESIGN AND METHODS OF CONSTRUCTION AND EQUIPMENT PART 2—ADMINISTRATION AND ENFORCEMENT SECTION R103 CONSTRUCTION DOCUMENTS
141	SECTION R104 FEES SECTION R105 INSPECTIONS
142	SECTION R106 VALIDITY SECTION R107 REFERENCED STANDARDS SECTION R108 STOP WORK ORDER
143	SECTION R109 BOARD OF APPEALS
144	CHAPTER 2 [RE] DEFINITIONS SECTION R201 GENERAL SECTION R202 GENERAL DEFINITIONS
148	CHAPTER 3 [RE] GENERAL REQUIREMENTS SECTION R301 CLIMATE ZONES
149	FIGURE R301.1 CLIMATE ZONES
150	TABLE R301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
151	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
152	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
153	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
154	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
155	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
156	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
157	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
158	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
159	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
160	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
161	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
162	TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE R301.3(1) INTERNATIONAL CLIMATE ZONE DEFINITIONS
163	TABLE R301.3(2) INTERNATIONAL CLIMATE ZONE DEFINITIONS SECTION R302 DESIGN CONDITIONS SECTION R303 MATERIALS, SYSTEMS AND EQUIPMENT
164	TABLE R303.1.3(1) DEFAULT GLAZED WINDOW, GLASS DOOR AND SKYLIGHT U-FACTORS TABLE R303.1.3(2) DEFAULT OPAQUE DOOR U-FACTORS TABLE R303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT
166	CHAPTER 4 [RE] RESIDENTIAL ENERGY EFFICIENCY SECTION R401 GENERAL SECTION R402 BUILDING THERMAL ENVELOPE
167	TABLE R402.1.2 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENTa TABLE R402.1.4 EQUIVALENT U-FACTORSa
168	TABLE R402.2.6 STEEL-FRAME CEILING, WALL AND FLOOR INSULATION R-VALUES
171	TABLE R402.4.1.1 AIR BARRIER AND INSULATION INSTALLATIONa
172	SECTION R403 SYSTEMS
174	TABLE R403.6.1 WHOLE-HOUSE MECHANICAL VENTILATION SYSTEM FAN EFFICACYa SECTION R404 ELECTRICAL POWER AND LIGHTING SYSTEMS SECTION R405 SIMULATED PERFORMANCE ALTERNATIVE (PERFORMANCE)
176	TABLE R405.5.2(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
177	TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
178	TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS TABLE R405.5.2(2) DEFAULT DISTRIBUTION SYSTEM EFFICIENCIES FOR PROPOSED DESIGNSa
179	SECTION R406 ENERGY RATING INDEX COMPLIANCE ALTERNATIVE EQUATION 4-1 TABLE R406.4 MAXIMUM ENERGY RATING INDEX
182	CHAPTER 5 [RE] EXISTING BUILDINGS SECTION R501 GENERAL SECTION R502 ADDITIONS
183	SECTION R503 ALTERATIONS SECTION R504 REPAIRS
184	SECTION R505 CHANGE OF OCCUPANCY OR USE
186	CHAPTER 6 [RE] REFERENCED STANDARDS AAMA ACCA APSP ASHRAE ASTM
187	CSA DASMA HVI ICC
188	IEEE NFPA NFRC RESNET
189	UL US-FTC WDMA
190	APPENDIX RA SOLAR-READY PROVISIONS—DETACHED ONE- AND TWO-FAMILY DWELLINGS AND TOWNHOUSES SECTION RA101 SCOPE SECTION RA102 GENERAL DEFINITION SECTION RA103 SOLAR-READY ZONE
192	INDEX
198	ICC MEMBERSHIP – BENEFITS THAT WORK FOR YOU
199	ICC EVALUATION SERVICE
200	ICC-SRCC
201	GET IMMEDIATE DOWNLOADS OF THE STANDARDS YOU NEED