BS 6229:2018
$167.15
Flat roofs with continuously supported flexible waterproof coverings. Code of practice
Published By | Publication Date | Number of Pages |
BSI | 2018 | 34 |
This revised edition of BS 6229 describes best current practice in the design, construction, care and maintenance of roofs with a flat or curved surface, at a pitch not greater than 10 degrees to the horizontal, with a continuously supported flexible waterproof covering. The supporting structure is either dense and heavy (such as a concrete slab), or consists of framing members supporting a lightweight deck of metal or of timber-based material.
NOTE Provided that the design conditions are similar, many of the recommendations contained in this code of practice apply to roofs at pitches greater than 10 degrees and to those designed as a Green Roof supporting planting.
This British Standard does not apply to certain types of cold stores and high temperature enclosures.
PDF Catalog
PDF Pages | PDF Title |
---|---|
4 | Foreword |
7 | 1 Scope 2 Normative references |
10 | 3 Terms and definitions |
12 | 4 Design 4.1 General design considerations 4.2 Types of flat roof system |
13 | Figure 1 — Typical warm roof system |
14 | Figure 2 — Typical inverted roof system |
15 | Figure 3 — Typical cold roof system |
16 | Figure 4 — Typical uninsulated roof system |
17 | 4.3 Structure 4.4 Roof falls to achieve drainage |
18 | 4.5 Rainwater disposal |
19 | Figure 5 — Example of level access to a warm roof system |
20 | Figure 6 — Example of level access to an inverted roof system |
21 | Figure 7 — Example of level access to an uninsulated roof system 4.6 Thermal performance |
23 | 4.7 Control of condensation |
24 | 4.8 Sound attenuation 4.9 Fire safety |
25 | 4.10 Surface protection |
26 | 4.11 Rooftop components and installations |
27 | 5 Materials 5.1 General 5.2 Roof slab/deck materials Table 1 — Slab/deck materials 5.3 Screeds |
28 | Table 2 — Materials for screeds 5.4 Waterproof layers Table 3 — Materials for waterproof layers 5.5 Thermal insulation Table 4 — Materials for thermal insulation 5.6 Air and vapour control layers |
29 | Table 5 — Air and vapour control layers 5.7 Vapour permeable membranes (breather membranes) 6 Workmanship |
30 | 7 Care and maintenance 7.1 Owner’s Building Information Manual 7.2 Inspections |
31 | 7.3 Maintenance procedures 7.4 Repair/renewal |
32 | Bibliography |